£19.99
Universal adapter for DJI CrystalSky 7.85″ monitors
Allows you to use the monitor in any general tablet holder, also works as a stand for watching movies.
High quality laser sintered Nylon, polished and dyed ‘carbon black’ finish, stainless steel bolts.
Out of stock
Easy to install, and allows to connect your monitor to any general tablet holder.
| Weight | 38 g |
|---|---|
| Dimensions | 75 × 45 × 25 mm |
Only logged in customers who have purchased this product may leave a review.
Simple and lightweight scope pointer. Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture.
For 36mm and 40mm tube diameters see EasyPin Extra
For click turrets with a custom made cap, or for sidewheels. With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire. Find out which pointer suits you best: Scope Pointer Comparison Table
NEW: there is an advanced version of this pointer available, too, with adjustable pin angle and also for 36mm and 40mm scope tubes: EasyPin Extra Scope Pointer
Custom base plates and adapters for the Scorpion Field Target Hook, to fit it to different rifle stocks
Other spare parts are available here: Scorpion FT Hook Extras.
Precision trigger for the following rifles:
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
Offset 0-10mm to both sides. If you need a trigger with more offset (up to 46 mm!) and much more adjustment options, check out my Flexipoint trigger.
These items are only spare parts for my trigger system (in black colour only), and allow you to try different surfaces and shapes to make sure, which one fits you the best in practice.
If you’d like to have a complete trigger, please click here: FlexiPoint offset trigger.
For detailed information please click on the tabs below:
Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
Magnifier for the parallax wheel, fully adjustable, with a lightweight and unbreakable Fresnel lens. Visible lens size 12.5×38.5 mm. Fits to all major scopes, can be folded up for safe carrying.
Please understand that it can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
If you have got a rubber ‘scope enhancer’, you can choose the special ‘Enhancer’ version that is a flexible half cylinder and can be mounted on the rubber enhancer by two massive cable ties.
Check out my new clicks magnifier, too: EagleEye Clicks Magnifier.
New updated ring design: The same function but a much wider adjustment range (40-47mm) and a better looking ring, ocular tube protection, bolt/nut secured against falling out.
Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.
Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes or 42-43 mm ocular tubes for shark fin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.
This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).
The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For combinations with other scope ring features, see Every Possible (And Impossible) Scope Ring Combination.
Precision offset trigger with wide range of adjustments, for the following rifles:
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.
If you’re after a simpler trigger which is in the centre or has only a small offset, please have a look at PinPoint v.2 Trigger, too.
A pair of two specially formed adjustable spacers that can connect to each other in four different heights:
Useful for spacing butt-hooks, hamsters and other rifle parts.
Prices stand for a pair of spacers.
LAST ONES!
Reviews
There are no reviews yet.