Description
Save up to £5.00!
EasyPin Extra Pointer
Price range: £14.99 through £24.99
Adjustable angle scope pointer (10°–90° to the scope tube, two positions). Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes, and needs only 10 mm space on the tube. The top is 11.5 mm above the tube in vertical pin position..
For parallax wheels and click turrets.
With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
The 30/34mm new design pointers are available in a ‘Target’ version i.e. with two pointers, one for the elevation turret and another on on the side for the windage turret.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
Additional information
| Weight | 7 g |
|---|---|
| DIAMETER | 1" (25.4 mm), 30 mm, 34 mm, 36 mm, 40 mm |
| DESIGN | Old design, New design |
Only logged in customers who have purchased this product may leave a review.
You may also like…
FlexiPoint Offset Trigger
Precision offset trigger with wide range of adjustments, for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Feinwerkbau (all models)
- Hämmerli AR-20
- Steyr LG-100/110
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.
If you’re after a simpler trigger which is in the centre or has only a small offset, please have a look at PinPoint v.2 Trigger, too.
Related Products
PinPoint v.2 Trigger
Precision trigger for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Daystate Adjustable Trigger
- Feinwerkbau (all models)
- FX Impact
- Hämmerli AR-20
- Steyr LG-100/110
- Suhl 150
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
Offset 0-10mm to both sides. If you need a trigger with more offset (up to 46 mm!) and much more adjustment options, check out my Flexipoint trigger.
FWB Loading Port Handle
Comfortable handle for the loading port of Feinwerkbau P70 rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.
With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.
The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.
WonderBar adjustable spacers (in pair)
A pair of two specially formed adjustable spacers that can connect to each other in four different heights:
Useful for spacing butt-hooks, hamsters and other rifle parts.
Prices stand for a pair of spacers.
LAST ONES!
FolloWing Adapter
Adapter piece to contact your existing FolloWing / SteadyWing / TopWing upper wing extension to another rifle or hook system:
- AirArms EV-2 / FTP-900
- Anschütz 4765 / Precise I
- Brian’s Hook
- Feinwerkbau 603 / P70 / 700 / 800
- Gehmann 809
- Grünig&Elmiger hooks
- MEC Contact-III / Free Position
- Steyr LG-100/110
- System Gemini hook
- TEC-HRO Fusion hook
- Generic adapter A (standard) / B (reverse)
If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own adapter.
All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.
For more information please read the Product Description below.
ComBrella shade for Combro
Snap-on shade for Combro Chrony
Combro Chronies use IR photodiodes as light source so they don’t need external light, but direct sunshine or fluorescent lights may disturb its function, resulting false readings.
This simple shade can be snapped onto the Chrony and gives an effective shade for the light sensors.
The new extended version connects with a bayonet to the Sniper barrel weight, keeping the chrony on its place, aligned with the barrel.
Composite Parallax Wheel
Stylish and professional scope parallax wheels, high quality laser sintered Nylon front with grooves at the edge, 12mm wide surface for your distance marks, leaves no mark on your scope.
- Composite Parallax Wheels: 82mm round, 125mm and 150mm DualCore (round centered/excentric), 229mm effective diameter comma wheel.
- Composite Click Turret: 54 mm oversized turret, resettable without tool, wit or without bottoming ring.
- Composite Zoom Lever: stylish and handy zoom lever.
- All three in a bundle on a reduced price: Composite Scope Kit
Please note that if your scope has a reticle illumination switch at the end of the parallax knob, its access may be partially or entirely blocked. Always contact me before placing your order so that we can discuss compatibility.
Every Possible (And Impossible) Scope Ring Combination
This is a unique product that allows you to combine Maestro Design’s new updated ring design scope parts in every possible (and impossible) combination:
- Some of these combinations are really useful and have been working so fine that I’m already selling them under different names like SmartPin Adjustable Pointer, SmartPin Combi with Magnifier, EasyPin Extra Pointer, EagleEye Clicks Magnifier and Folding Windicator / Alligator Clip.
- Some are not the usual combinations but may be perfect if this is what you want, e.g. a pointer on the left side and a click chart holder alligator clip on the right side.
- Some are not too useful or won’t work at all in FT, mainly because the two halves ought to be on different places along the scope tube, e.g. a pointer with a magnifier where the pointer should be at the turret and the magnifier at the zoom ring. However, still might be useful for other shooting disciplines.
- Some of them is pretty useless, nevertheless, I have allowed every possible (and impossible) combination, for experimenting or just for fun.
PLEASE NOTE that it’s your responsibility to carefully consider how the desired combination would work on your scope, where can you put it, will it not clash with other parts, is there enough space for the folding arm etc. If you are not sure please CONTACT MEÂ before placing an order.
Most combinations are in stock but I can not guarantee this. If you need it urgently, please contact me before ordering to find out whether your combination is available.
Made of high quality laser sintered Nylon with stainless steel nuts and bolts.
Save up to £15.00!
Price range: £14.99 through £43.99
Select options
This product has multiple variants. The options may be chosen on the product page
SmartPin Adjustable Pointer
Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.
Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes or 42-43 mm ocular tubes for shark fin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.
This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).
The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For combinations with other scope ring features, see Every Possible (And Impossible) Scope Ring Combination.
Reviews
There are no reviews yet.