£19.99
Universal adapter for DJI CrystalSky 7.85″ monitors
Allows you to use the monitor in any general tablet holder, also works as a stand for watching movies.
High quality laser sintered Nylon, polished and dyed ‘carbon black’ finish, stainless steel bolts.
Out of stock
Easy to install, and allows to connect your monitor to any general tablet holder.
| Weight | 38 g |
|---|---|
| Dimensions | 75 × 45 × 25 mm |
Only logged in customers who have purchased this product may leave a review.
Experimental project:…
Coloured versions of the FT industrial standard SmartPin Adjustable Pointer.
The usual quality laser sintered Nylon parts just in another colours.
There is only one from each colour (Red, Green, Blue and Yellow) with the following parameters:
Have fun! :-)
Adjustable angle scope pointer (10°–90° to the scope tube, two positions). Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes, and needs only 10 mm space on the tube. The top is 11.5 mm above the tube in vertical pin position..
For parallax wheels and click turrets.
With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
The 30/34mm new design pointers are available in a ‘Target’ version i.e. with two pointers, one for the elevation turret and another on on the side for the windage turret.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
Custom base plates and adapters for the Scorpion Field Target Hook, to fit it to different rifle stocks
Other spare parts are available here: Scorpion FT Hook Extras.
Magnifier for the parallax wheel, fully adjustable, with a lightweight and unbreakable Fresnel lens. Visible lens size 12.5×38.5 mm. Fits to all major scopes, can be folded up for safe carrying.
Please understand that it can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
If you have got a rubber ‘scope enhancer’, you can choose the special ‘Enhancer’ version that is a flexible half cylinder and can be mounted on the rubber enhancer by two massive cable ties.
Check out my new clicks magnifier, too: EagleEye Clicks Magnifier.
New updated ring design: The same function but a much wider adjustment range (40-47mm) and a better looking ring, ocular tube protection, bolt/nut secured against falling out.
Snap-on shade for Combro Chrony
Combro Chronies use IR photodiodes as light source so they don’t need external light, but direct sunshine or fluorescent lights may disturb its function, resulting false readings.
This simple shade can be snapped onto the Chrony and gives an effective shade for the light sensors.
The new extended version connects with a bayonet to the Sniper barrel weight, keeping the chrony on its place, aligned with the barrel.
Simple and lightweight scope pointer. Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture.
For 36mm and 40mm tube diameters see EasyPin Extra
For click turrets with a custom made cap, or for sidewheels. With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire. Find out which pointer suits you best: Scope Pointer Comparison Table
NEW: there is an advanced version of this pointer available, too, with adjustable pin angle and also for 36mm and 40mm scope tubes: EasyPin Extra Scope Pointer
These items are only spare parts for my trigger system (in black colour only), and allow you to try different surfaces and shapes to make sure, which one fits you the best in practice.
If you’d like to have a complete trigger, please click here: FlexiPoint offset trigger.
For detailed information please click on the tabs below:
Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
Comfortable handle for the loading port of Feinwerkbau P70 rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.
With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.
The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.
Reviews
There are no reviews yet.