Additional information
| Weight | 271 g |
|---|---|
| Dimensions | 120 × 28 × 28 mm |
Sold
Barrel Weight 17.22mm
£29.99
Genuine Walther LGR barrel weight, may fit other rifles, too (please check the diameter of your barrel before ordering).
Steel, 271g and the inside diameter is 17.22mm.
Out of stock
Only logged in customers who have purchased this product may leave a review.
You may also like…
Sniper Barrel Weight
Flat barrel weight for Feinwerkbau / Anschütz rifles. The same weight (79 g) as the original FWB aluminium barrel weight but allows using longer cylinders – it is only 1 mm thick below and above the barrel. Laser sintered Nylon, with stainless steel grub screw. The M6 threaded holes at the bottom allow you to add up to 10 grub screws to fine tune the total weight and its distribution. The barrel weight aligns itself to the dovetail at the end of FWB barrel. It clamps onto the barrel only with Nylon parts so doesn’t scratch the barrel surface.
New: available also for Daystate Griffin, everything the same as above.
New version: Similar for Steyr but longer, with three air stripper plates as well. ComBrella can’t be connected to this model.
Intimidate your opponents with a rifle that looks like a .50 cal sniper gun! ;-)
Now you can have it with the ComBrella shade that can hold a Combro chrony and connects with a bayonet to the barrel weight, keeping the chrony on its place, aligned with the barrel and protecting it from the sunlight.
It can be ordered with a built-in folding windicator, too.
Sold
£34.99
Out of stock
Barrel Weight 19.91mm
Genuine Feinwerkbau P70FT barrel weight, may fit other rifles, too (please check the diameter of your barrel before ordering).
With an extra M6 hole for a windicator.
Aluminum, 77g and the inside diameter is 19.91mm
Related Products
Save £19.00!
Original price was: £34.90.£15.90Current price is: £15.90.
Add to basket
Centra Vertical 2.4mm
For M18 diopter tunnel
WonderBar adjustable spacers (in pair)
A pair of two specially formed adjustable spacers that can connect to each other in four different heights:
Useful for spacing butt-hooks, hamsters and other rifle parts.
Prices stand for a pair of spacers.
LAST ONES!
Folding Windicator / Alligator Clip
Professional folding windicator with orange Nylon cord or alligator clips. Fits to any barrel or air cylinder (with the included adapter), 11mm dovetails, Picatinny/Weaver rails, standard UIT accessory rails, 1″ (25.4mm), 30mm and 34mm scope tubes.
The arm clicks into position when folded in or out (except for the scope ring versions). Ready to use with cable ties / bolts and cord, but of course you can replace the cord any time you like. Unbreakable, flexible, and only 7 grams. Made of high quality laser sintered Nylon, stainless steel nut and bolt.
NEW: also available with new design scope rings. For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
NEW: all the windicators are available with alligator clips, too. See the options below.
Sold
Original price was: £14.99.£9.99Current price is: £9.99.
Select options
This product has multiple variants. The options may be chosen on the product page
EasyPin Pointer
Simple and lightweight scope pointer. Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture.
For 36mm and 40mm tube diameters see EasyPin Extra
For click turrets with a custom made cap, or for sidewheels. With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire. Find out which pointer suits you best: Scope Pointer Comparison Table
NEW: there is an advanced version of this pointer available, too, with adjustable pin angle and also for 36mm and 40mm scope tubes: EasyPin Extra Scope Pointer
FWB Stock Middle Parts
Replacement elements for the FWB P70 Alutec stock, giving new features to the rifle:
- Fully adjustable offset grip
- Elevating the rear part by 50 mm
- Saving 250 g weight
Also the original grip can be used (but without the offset feature). The parts are made of laser sintered Nylon, lightweight but very strong, I personally have tested this kit on my rifle. The new design elevates the cheek piece part so it fits better to high FT scopes. The grip is fully adjustable, and the offset can be set between 7.5 and 22.5 mm.
Right handed, used but in “as new” condition, with some very small usage marks. Can be bought with a ball grip and/or with a grey anatomic grip.
In order to use this kit, you have to cut your original stock, and drill 3 new holes onto it, I’ll attach the technical drawings of all these modifications of course.
I can offer a full FWB collection, please contact me for a discounted price if you are interested in the following products together:
- This kit
- FWB Anti-POI-Shift Kit (optionally with FWB Anti-POI-Shift Rail)
- FWB Loading Port Handle
- FlexiPoint Offset Trigger for FWB
- FlexiPoint Additional Trigger Blade
Sold
Price range: £59.99 through £129.99
Select options
This product has multiple variants. The options may be chosen on the product page
DualCore Sidewheel + SmartPin Pointer
A unique parallax wheel with two centres: can be used in centered or in excentric position, wide space for the scale, strong and unbreakable. See the details at the bottom on the page.
This sidewheel has been designed on a way, that it will fit to the scope and to my SmartPin Pointer and ProTurret Click Knob as well. If you order only a sidewheel, please make sure that it does not clash with the third party accessories. If you have any questions, please contact me before placing an order.
The pointers fit perfectly to my sidewheel. The ring size will be automatically selected according to your scope’s tube diameter. If you want me to send a pointer with an extended scale (10 mm more travel for the pin/stripe), please select your pointer type here and add 5 pounds to the order by using the Additional Payment page.
Made of strong UV-stable ASA polymer (professionally polished), with stainless steel screws. Please note that I have slightly modified the design, certain wheels may differ in smaller details compared to the photos.
This product has been discontinued, check out the new design, the Composite series:
- Composite Parallax Wheels: 125mm and 150mm DualCore (round centered/excentric), 225mm effective diameter comma wheel.
- Composite Click Turret: 54 mm oversized turret, resettable without tool, wit or without bottoming ring.
- Composite Zoom Lever: stylish and handy zoom lever.
- All three in a bundle on a reduced price: Composite Scope Kit
FWB Loading Port Handle
Comfortable handle for the loading port of Feinwerkbau P70 rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.
With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.
The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.
InkWell for Pellet Sizer
Pellet collector for pellet sizers. Please note that the pellet sizer is NOT included, it has to be bought separately from UK Neil or other manufacturers.
Can collect about 300 pellets. If you take the bottom plate off, will fit firmly into a tin so you can size the pellets directly into the tin.
High quality laser sintered Nylon (black dyed and polished), stainless steel screws.
Some words from the product’s first user: “A great product. Very light. The UK Neil sizer slides into the ink well holder for a perfectly snug fit. Enables speedy sizing and any pellets dropped fall onto the top of the well. This stops the odd dropped pellet falling into your sized pellets by mistake. Perfect.“
And a short review on Youtube from another customer: https://youtu.be/DlvtUxTHPSs?t=343
Reviews
There are no reviews yet.