Additional information
| Weight | 7 g |
|---|---|
| CONNECTS TO | Barrel / Air Cylinder, Standard Dovetail, Weaver / Picatinny Rail, UIT Accessory Rail, 1" (25.4mm) ring, 30mm ring, 34mm ring, – Design My Windicator! – |
Folding Windicator / Alligator Clip
Price range: £34.99 through £44.99
Professional folding windicator with orange Nylon cord or alligator clips. Fits to any barrel or air cylinder (with the included adapter), 11mm dovetails, Picatinny/Weaver rails, standard UIT accessory rails, 1″ (25.4mm), 30mm and 34mm scope tubes.
The arm clicks into position when folded in or out (except for the scope ring versions). Ready to use with cable ties / bolts and cord, but of course you can replace the cord any time you like. Unbreakable, flexible, and only 7 grams. Made of high quality laser sintered Nylon, stainless steel nut and bolt.
NEW: also available with new design scope rings. For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
NEW: all the windicators are available with alligator clips, too. See the options below.
Only logged in customers who have purchased this product may leave a review.
You may also like…
PinPoint v.2 Trigger
Precision trigger for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Daystate Adjustable Trigger
- Feinwerkbau (all models)
- FX Impact
- Hämmerli AR-20
- Steyr LG-100/110
- Suhl 150
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
Offset 0-10mm to both sides. If you need a trigger with more offset (up to 46 mm!) and much more adjustment options, check out my Flexipoint trigger.
Related Products
FlexiPoint Offset Trigger
Precision offset trigger with wide range of adjustments, for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Feinwerkbau (all models)
- Hämmerli AR-20
- Steyr LG-100/110
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.
If you’re after a simpler trigger which is in the centre or has only a small offset, please have a look at PinPoint v.2 Trigger, too.
Rowan’s Forend (+ Gripster)
Rowan Engineering’s industry standard forend mechanism with full range of the original adapters with an optional Gripster palm shelf, also allowing to connect the JOPA folding bipod (to the 6 or 7 indents versions).
Please allow a couple of days for dispatch this order.
If you are after a smaller and lighter mechanism but with some extra comfort, check out our Gearbox Winding Forend.
The hamster can be bought separately, too: Gripster hamster
Sold
£29.99
Out of stock
Barrel Weight 17.22mm
Genuine Walther LGR barrel weight, may fit other rifles, too (please check the diameter of your barrel before ordering).
Steel, 271g and the inside diameter is 17.22mm.
FWB Loading Port Handle
Comfortable handle for the loading port of Feinwerkbau P70 rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.
With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.
The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.
Sold
Original price was: £160.00.£99.90Current price is: £99.90.
Out of stock
FWB Woodwork
Original wooden parts for FWB P70 Match/FT Alutec stock:
– Grip: R/H size L, with two threaded nuts at the bottom for mounting an additional palm shelf,
– Cheek piece: prone style (symmetric),
Colours: beech/red laminate.
All in good condition, with a few minor marks from usage, as seen on the photos.
To be sold only together.
See also: other Feinwerkbau related products
Sold
£34.99
Out of stock
Barrel Weight 19.91mm
Genuine Feinwerkbau P70FT barrel weight, may fit other rifles, too (please check the diameter of your barrel before ordering).
With an extra M6 hole for a windicator.
Aluminum, 77g and the inside diameter is 19.91mm
THE Field Target Shooting Glove
The world’s first dedicated Field Target glove, designed specially for FT / HFT shooting, by a Field Target shooter. This is a high quality heavy target glove, for the leading hand (left hand for a right-handed shooter and vica versa), padded and with Top Grip on most surfaces.
Three fingers are half length so the shooter can easily rangefind and click the scope. Thick but quite flexible Top Grip pads on every surface where needed for every shooting position and with elastic wrist band.
Available sizes: XS, S, M, L, XL – please check the sizing guide below for your glove.
Available colours: Black, Blue, Red, Green (new!!!)
Sorry but only Black for L/H shooters)
WFTF Target Checker
The official WFTF Target Checker (designed by Brian Samson, public domain, printed under the Creative Commons CC0 licence).
“The device is designed to give an equivalent impact force to an airgun pellet hitting the paddle of a target at 5.5 ft/lbs energy (7 Joules). To mimic the effect of a target being shot at with a WFTF legal air rifle at 55 yards.”
Fully assembled and ready to use. High quality 3D-printed PLA/PHA in black and orange colours, stainless steel bolts/nuts.
MK2 2018– Brian’s original design
MK3 2019 – Smaller improvements like easily adjustable depth gauge, wrist strap, killzone diameter checkers etc., see below for more details.
MK4 2020 – Further improvements to resolve all issues of the original design. Re-designed internal parts, spring tension can be fine-tuned with a hex key, free travel length of the probe doubled.
MK4.1 2023 – Further improvements, small modifications, safer trigger etc.
MK4.2 2024 – Morer improvements, re-designed trigger, spring guide etc.
Available colours: Dutch Orange, Ultra Marine Blue, Traffic Red, Leaf Green, Intense Green, Fluorescent Pink, Signal Yellow, Shining Silver and Sky Blue, all with black sides.
Detailed instructions manual (by Scott Hull): download PDF
Reviews
There are no reviews yet.