Description
- Please contact me with any questions, I can design any custom part or modify the existing ones, according to your needs.
- For additional extras and an immediately available prototype please see Scorpion FT Hook Extras.
Scorpion Base Plates
Price range: £4.99 through £49.90
Custom base plates and adapters for the Scorpion Field Target Hook, to fit it to different rifle stocks
Other spare parts are available here: Scorpion FT Hook Extras.
Additional information
| Weight | 19 g |
|---|---|
| Dimensions | 125 × 46 mm |
| VERSION | Standard 125x30mm, Design my Plate (flat shape), Design my Plate (special), Aeron CZ, Anschütz 1903, Anschütz 9015, Airarms 500, BSA Gold Star, Daystate GP, Daystate Pulsar, XTI-50 / FTP-900 / EV-2 mk4 adapter, FX Crown, FX Impact, FX Impact-2, FX Royale 400, HW-97, Ruger RPR, RAW TM1000 |
You may also like…
Scorpion FT Hook Extras MK4
Extras and spare/replacement parts for the old Scorpion MK4 FT hook system.
Scorpion MK5 extra parts are here: Scorpion FT Hook Extras MK5
Fitting the hook to different stocks: see Scorpion Base Plates
Related Products
Sold
£89.90
Select options
This product has multiple variants. The options may be chosen on the product page
JOPA Folding Bipod
Folding bipod, made of quality materials. Body: black or silver anodised aluminium alloy, legs: 5mm stainless steel with 20mm black plastic balls.
Long legs (12.5cm = 5″ between the ground and the rifle’s stock)
Fits to all rifles with standard accessory rail or similar (AirArms, Anschütz, Walther, Steyr, Feinwerkbau, Hämmerli etc.)
Sorry this product is discontinued but now I have two black ex demo pieces available, been used for a couple of competitions, photo sessions and as a demo when selling other ones on international competitions. In excellent condition, only with a few marks from being mounted onto a rifle.
These are the very last ones of the JOPA series.
Check out my new Atlas Extra Wide FT Bipod
Save up to £20.00!
Price range: £109.90 through £189.90
Select options
This product has multiple variants. The options may be chosen on the product page
Scorpion Fully Adjustable FT Hook – MK5 New Design
Fully adjustable Field Target hook, with much more versatility than the usual Gemini clones. Everything can be adjusted even in the shooting position, without disassembling the hook. Modular system that can be upgraded later if needed. Massive construction, without any flex and slip, a lightweight and versatile alternative to the traditional metal hooks.
For additional extras and spare parts please see Scorpion FT Hook Extras
Fitting the hook to different stocks: see Scorpion Base Plates
The last couple of old design Scorpion MK4 hooks (R/H and true L/H) are available here: Scorpion MK4 on SALE
Scorpion MK5 New Design
I added a lot of improvements to my professional FT hook design, creating the MK5 (2023) version that will replace the discontinued MK4 (2016-2022) version. Some parts are backwards compatible with the MK4 so the two systems can be combined if you don’t mind some visual differences but I’d suggest not to mix the two systems.
Features on the new MK5 design (see detailed listing with photos and dimensions at the bottom of the web page):
- Engraved marks for all adjustments – now you can record and reproduce your settings any time
- New 152mm stainless steel hook, 137mm and 97mm Nylon FT-hooks
- HFT-compatible 2.25” (57mm) Nylon hook
- Extended upper wing base option, for better integration with the Butt Pad Kit or to add half a link length to the upper wing
- Slim hook holder links – don’t protrude that much as the old design
- Rounded link elements – gives a smoother fit when the links are twisted
- HFT-compatible 2.25” (57mm) extended one-piece upper wing
- Fully re-designed FolloWing articulated wing – with the massive cogs style connection instead of the weak link
- Dual or single thumb screw variations for FT shooters
- Dual or single bolt variations for HFT and other disciplines where a quick adjustment is not needed
- Three T-Rail versions: 130mm, 150mm and NEW: 150mm with integrated inline monopod
- 3-position limiter bolts on both ends of the T-rail
- Coloured base plate and knobs are available, too
- Other minor improvements that are not listed here
The new design Scorpion MK5 hooks are now in stock.
Save up to £15.00!
Price range: £14.99 through £43.99
Select options
This product has multiple variants. The options may be chosen on the product page
SmartPin Adjustable Pointer
Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.
Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes or 42-43 mm ocular tubes for shark fin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.
This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).
The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For combinations with other scope ring features, see Every Possible (And Impossible) Scope Ring Combination.
FolloWing Adapter
Adapter piece to contact your existing FolloWing / SteadyWing / TopWing upper wing extension to another rifle or hook system:
- AirArms EV-2 / FTP-900
- Anschütz 4765 / Precise I
- Brian’s Hook
- Feinwerkbau 603 / P70 / 700 / 800
- Gehmann 809
- Grünig&Elmiger hooks
- MEC Contact-III / Free Position
- Steyr LG-100/110
- System Gemini hook
- TEC-HRO Fusion hook
- Generic adapter A (standard) / B (reverse)
If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own adapter.
All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.
For more information please read the Product Description below.
FWB Anti-POI-Shift Kit
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
FWB Loading Port Handle
Comfortable handle for the loading port of Feinwerkbau P70 rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.
With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.
The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.
PinPoint v.2 Trigger
Precision trigger for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Daystate Adjustable Trigger
- Feinwerkbau (all models)
- FX Impact
- Hämmerli AR-20
- Steyr LG-100/110
- Suhl 150
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
Offset 0-10mm to both sides. If you need a trigger with more offset (up to 46 mm!) and much more adjustment options, check out my Flexipoint trigger.
Cheek Piece
Lightweight cheek piece for any rifle. 39mm high.
Please note that teh top edges are a bit more rounded than on the photos.
Laser sintered Nylon, polished black surface.
Connection: two M5 nuts, CTC 90mm.