Additional information
| Weight | 73 g |
|---|
SC Long Hook, Nylon 137mm – L/H
£42.49
Only 1 left in stock (can be backordered)
Related Products
Rowan’s Forend (+ Gripster)
Rowan Engineering’s industry standard forend mechanism with full range of the original adapters with an optional Gripster palm shelf, also allowing to connect the JOPA folding bipod (to the 6 or 7 indents versions).
Please allow a couple of days for dispatch this order.
If you are after a smaller and lighter mechanism but with some extra comfort, check out our Gearbox Winding Forend.
The hamster can be bought separately, too: Gripster hamster
Save up to £30.00!
Price range: £99.99 through £169.99
Select options
This product has multiple variants. The options may be chosen on the product page
Gearbox Winding Forend
The forend you have always wanted:
- Continuous height adjustment between 45-105mm
- Just wind the handle, even while aiming
- Self-locking in any position
- For right and left handed use
- Lightweight, only 170g / 290g (Original / Duplex)
If you are after something much bigger, made of metal and with traditional adjustments, check out our Rowan’s Forend + Gripster combination.
Sold
Original price was: £29.99.£19.99Current price is: £19.99.
Out of stock
Hook Offset Plate 20/35mm
Adapter plate for mounting a hook with a certain offset.
Connection to hook: M5 Nyloc nuts, CTC 90mm
Connection to rifle: M5 countersunk holes, CTC 20mm, 70mm and alrogether 90mm
Offset: 20mm or 35mm.
Thick laser sintered Nylon plate, very massive. Polished black surface.
FWB Anti-POI-Shift Kit
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
FWB Stock Middle Parts
Replacement elements for the FWB P70 Alutec stock, giving new features to the rifle:
- Fully adjustable offset grip
- Elevating the rear part by 50 mm
- Saving 250 g weight
Also the original grip can be used (but without the offset feature). The parts are made of laser sintered Nylon, lightweight but very strong, I personally have tested this kit on my rifle. The new design elevates the cheek piece part so it fits better to high FT scopes. The grip is fully adjustable, and the offset can be set between 7.5 and 22.5 mm.
Right handed, used but in “as new” condition, with some very small usage marks. Can be bought with a ball grip and/or with a grey anatomic grip.
In order to use this kit, you have to cut your original stock, and drill 3 new holes onto it, I’ll attach the technical drawings of all these modifications of course.
I can offer a full FWB collection, please contact me for a discounted price if you are interested in the following products together:
- This kit
- FWB Anti-POI-Shift Kit (optionally with FWB Anti-POI-Shift Rail)
- FWB Loading Port Handle
- FlexiPoint Offset Trigger for FWB
- FlexiPoint Additional Trigger Blade
Save up to £20.00!
Price range: £109.90 through £189.90
Select options
This product has multiple variants. The options may be chosen on the product page
Scorpion Fully Adjustable FT Hook – MK5 New Design
Fully adjustable Field Target hook, with much more versatility than the usual Gemini clones. Everything can be adjusted even in the shooting position, without disassembling the hook. Modular system that can be upgraded later if needed. Massive construction, without any flex and slip, a lightweight and versatile alternative to the traditional metal hooks.
For additional extras and spare parts please see Scorpion FT Hook Extras
Fitting the hook to different stocks: see Scorpion Base Plates
The last couple of old design Scorpion MK4 hooks (R/H and true L/H) are available here: Scorpion MK4 on SALE
Scorpion MK5 New Design
I added a lot of improvements to my professional FT hook design, creating the MK5 (2023) version that will replace the discontinued MK4 (2016-2022) version. Some parts are backwards compatible with the MK4 so the two systems can be combined if you don’t mind some visual differences but I’d suggest not to mix the two systems.
Features on the new MK5 design (see detailed listing with photos and dimensions at the bottom of the web page):
- Engraved marks for all adjustments – now you can record and reproduce your settings any time
- New 152mm stainless steel hook, 137mm and 97mm Nylon FT-hooks
- HFT-compatible 2.25” (57mm) Nylon hook
- Extended upper wing base option, for better integration with the Butt Pad Kit or to add half a link length to the upper wing
- Slim hook holder links – don’t protrude that much as the old design
- Rounded link elements – gives a smoother fit when the links are twisted
- HFT-compatible 2.25” (57mm) extended one-piece upper wing
- Fully re-designed FolloWing articulated wing – with the massive cogs style connection instead of the weak link
- Dual or single thumb screw variations for FT shooters
- Dual or single bolt variations for HFT and other disciplines where a quick adjustment is not needed
- Three T-Rail versions: 130mm, 150mm and NEW: 150mm with integrated inline monopod
- 3-position limiter bolts on both ends of the T-rail
- Coloured base plate and knobs are available, too
- Other minor improvements that are not listed here
The new design Scorpion MK5 hooks are now in stock.
Cheek Piece
Lightweight cheek piece for any rifle. 39mm high.
Please note that teh top edges are a bit more rounded than on the photos.
Laser sintered Nylon, polished black surface.
Connection: two M5 nuts, CTC 90mm.
Scorpion Inline Monopod
Special T-rail for all (old MK4 and new MK5 design) Scorpion hooks with an integrated inline monopod.
- Seamless integration into all Scorpion systems
- The support is exactly in the centre line
- Thumb screw can be mounted on either side, for right and left handed shooters
- Simple rubber button or spectacular ball joint foot variations
- Tall hyperboloid grip for quick settings or wide screw for accurate positioning
- MK5 Limiter bolt at the top
- Adds +10mm to the rifle length (compared to a standard Scorpion T-rail)
- Rail length 134mm, total length 150mm
- Lead screw length 150mm (12/31mm is within the foot, and at least 20mm has to remain in the T-rail)
- High quality laser sintered Nylon, polished black, with stainless steel screws, rubber foot surface
Available on a discounted price when bought with a new MK5 Scorpion hook.