Additional information
| Weight | 5 g |
|---|---|
| DIAMETER | 1" (25.4 mm), 30 mm, 34 mm |
Sold
EasyPin Pointer
Original price was: £14.99.£9.99Current price is: £9.99.
Simple and lightweight scope pointer. Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture.
For 36mm and 40mm tube diameters see EasyPin Extra
For click turrets with a custom made cap, or for sidewheels. With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire. Find out which pointer suits you best: Scope Pointer Comparison Table
NEW: there is an advanced version of this pointer available, too, with adjustable pin angle and also for 36mm and 40mm scope tubes: EasyPin Extra Scope Pointer
Only logged in customers who have purchased this product may leave a review.
You may also like…
FlexiPoint Offset Trigger
Precision offset trigger with wide range of adjustments, for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Feinwerkbau (all models)
- Hämmerli AR-20
- Steyr LG-100/110
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.
If you’re after a simpler trigger which is in the centre or has only a small offset, please have a look at PinPoint v.2 Trigger, too.
Related Products
Sold
Price range: £873.90 through £908.90
Select options
This product has multiple variants. The options may be chosen on the product page
Falcon X50 FT Scope + Composite Scope Kit
Brand New Falcon X50 FT Scope + Complete kit of Composite Wheel / Click / Zoom accessories on a bundle price!
- Falcon Optics X50 series 10-50×60 FT scope, second focal plane MOA200 reticle, 1/8 MOA clicks, sunshade, flip up covers, black colour, brand new.
- Composite Parallax Wheel: 125mm or 150mm DualCore (round centered/excentric), or 225mm effective diameter comma wheel + SmartPin pointer (pins or linear) with extended scale,
- Composite Click Turret: 54 mm oversized turret, resettable without tool, with adjustable bottoming ring + EasyPin Extra pointer,
- Composite Zoom Lever: stylish and handy zoom lever that can fit onto the zoom ring in 6 different positions.
10 year warranty against defects in materials and workmanship.
Shipping within 1 week, with all accessories mounted.
ComBrella shade for Combro
Snap-on shade for Combro Chrony
Combro Chronies use IR photodiodes as light source so they don’t need external light, but direct sunshine or fluorescent lights may disturb its function, resulting false readings.
This simple shade can be snapped onto the Chrony and gives an effective shade for the light sensors.
The new extended version connects with a bayonet to the Sniper barrel weight, keeping the chrony on its place, aligned with the barrel.
Save up to £15.00!
Price range: £14.99 through £43.99
Select options
This product has multiple variants. The options may be chosen on the product page
SmartPin Adjustable Pointer
Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.
Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes or 42-43 mm ocular tubes for shark fin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.
This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).
The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For combinations with other scope ring features, see Every Possible (And Impossible) Scope Ring Combination.
Scorpion Base Plates
Custom base plates and adapters for the Scorpion Field Target Hook, to fit it to different rifle stocks
Other spare parts are available here: Scorpion FT Hook Extras.
SmartPin Combi with Magnifier
This is a special version of the ‘FT industrial standard’ SmartPin Adjustable Pointer, its long scale (30mm) version combined with the EagleEye Clicks Magnifier for those who don’t have much space on the scope tube.
The SmartPin Combi pointer has one or two magnifier windows for the click turret(s), and needs only 10mm only on the scope tube!
High quality laser sintered Nylon, stainless steel bolts and nuts, Fresnel type 3x mag plastic lenses.
It can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
FWB Anti-POI-Shift Kit
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
WonderBar adjustable spacers (in pair)
A pair of two specially formed adjustable spacers that can connect to each other in four different heights:
Useful for spacing butt-hooks, hamsters and other rifle parts.
Prices stand for a pair of spacers.
LAST ONES!
MicroLevel Adapter For Sightron S-III
Adapter for using MicroLevel electronic level indicator on Sightron S-III scopes with reticle illumination.
It can be mounted on the ocular tube, the tapered end goes into the MicroLevel’s rubber ring and has got grooves for the cable tie fixing. The inside will remain matte black for reducing light reflections. Four different lengths, by cutting off one or more rings from the end, each cut shortens it by 6 mm.
For more info please contact me.
Reviews
There are no reviews yet.