Additional information
| Weight | 64 g |
|---|---|
| RIFLE MODEL | FWB P70 FT Alutec, FWB P800 Basic, Bespoke design |
FWB Anti-POI-Shift Kit
Price range: £59.90 through £79.90
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
Only logged in customers who have purchased this product may leave a review.
You may also like…
Anti-POI-Shift Rail (for Feinwerkbau / Anschütz)
High quality scope rail for Feinwerkbau or Anschütz PCP rifles. Designed especially to work together with my FWB Anti-POI-Shift Kit, using these products together eliminates the POI-shifts on Feinwerkbau Alutec stocks. I’ve been using the same solution on my rifle, and the last time I zeroed my rifle was in 2012, need to tell anything more?!?
Made of aircraft grade aluminium alloy, black anodised with stainless steel bolts or silver anodised with black bolts. Elevation 35 mm, reproduces the same dovetail on the top as the rifle’s original dovetail. The in-built slope is 0.71% = 24.4 MOA so any simple mount ring will do without shimming.
For a perfect solution please see also: FWB Anti-POI-Shift Kit.
Related Products
Rowan’s Forend (+ Gripster)
Rowan Engineering’s industry standard forend mechanism with full range of the original adapters with an optional Gripster palm shelf, also allowing to connect the JOPA folding bipod (to the 6 or 7 indents versions).
Please allow a couple of days for dispatch this order.
If you are after a smaller and lighter mechanism but with some extra comfort, check out our Gearbox Winding Forend.
The hamster can be bought separately, too: Gripster hamster
Save up to £15.00!
Price range: £14.99 through £43.99
Select options
This product has multiple variants. The options may be chosen on the product page
SmartPin Adjustable Pointer
Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.
Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes or 42-43 mm ocular tubes for shark fin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.
This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).
The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For combinations with other scope ring features, see Every Possible (And Impossible) Scope Ring Combination.
FlexiPoint Spare Blades
These items are only spare parts for my trigger system (in black colour only), and allow you to try different surfaces and shapes to make sure, which one fits you the best in practice.
If you’d like to have a complete trigger, please click here: FlexiPoint offset trigger.
For detailed information please click on the tabs below:
Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
- ‘Centre’ gives a d=2 mm sharp point in the middle, giving a very precise feedback of the actual pull weight, the edge gives only a small hint of the right pull direction.
- ‘Deep’ follows the shape of the fingertip, giving a comfortable and evenly distributed contact on the whole surface.
- ‘Edge’ is for those who are after the right pull direction, combined with a comfortable feeling of the deeper middle surface.
- ‘Flat’ feels like a flat surface, simple and precise.
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
WonderBar adjustable spacers (in pair)
A pair of two specially formed adjustable spacers that can connect to each other in four different heights:
Useful for spacing butt-hooks, hamsters and other rifle parts.
Prices stand for a pair of spacers.
LAST ONES!
Scorpion Base Plates
Custom base plates and adapters for the Scorpion Field Target Hook, to fit it to different rifle stocks
Other spare parts are available here: Scorpion FT Hook Extras.
FWB Loading Port Handle
Comfortable handle for the loading port of Feinwerkbau P70 rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.
With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.
The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.
Scorpion FT Hook Extras MK4
Extras and spare/replacement parts for the old Scorpion MK4 FT hook system.
Scorpion MK5 extra parts are here: Scorpion FT Hook Extras MK5
Fitting the hook to different stocks: see Scorpion Base Plates
Save up to £20.00!
Price range: £109.90 through £189.90
Select options
This product has multiple variants. The options may be chosen on the product page
Scorpion Fully Adjustable FT Hook – MK5 New Design
Fully adjustable Field Target hook, with much more versatility than the usual Gemini clones. Everything can be adjusted even in the shooting position, without disassembling the hook. Modular system that can be upgraded later if needed. Massive construction, without any flex and slip, a lightweight and versatile alternative to the traditional metal hooks.
For additional extras and spare parts please see Scorpion FT Hook Extras
Fitting the hook to different stocks: see Scorpion Base Plates
The last couple of old design Scorpion MK4 hooks (R/H and true L/H) are available here: Scorpion MK4 on SALE
Scorpion MK5 New Design
I added a lot of improvements to my professional FT hook design, creating the MK5 (2023) version that will replace the discontinued MK4 (2016-2022) version. Some parts are backwards compatible with the MK4 so the two systems can be combined if you don’t mind some visual differences but I’d suggest not to mix the two systems.
Features on the new MK5 design (see detailed listing with photos and dimensions at the bottom of the web page):
- Engraved marks for all adjustments – now you can record and reproduce your settings any time
- New 152mm stainless steel hook, 137mm and 97mm Nylon FT-hooks
- HFT-compatible 2.25” (57mm) Nylon hook
- Extended upper wing base option, for better integration with the Butt Pad Kit or to add half a link length to the upper wing
- Slim hook holder links – don’t protrude that much as the old design
- Rounded link elements – gives a smoother fit when the links are twisted
- HFT-compatible 2.25” (57mm) extended one-piece upper wing
- Fully re-designed FolloWing articulated wing – with the massive cogs style connection instead of the weak link
- Dual or single thumb screw variations for FT shooters
- Dual or single bolt variations for HFT and other disciplines where a quick adjustment is not needed
- Three T-Rail versions: 130mm, 150mm and NEW: 150mm with integrated inline monopod
- 3-position limiter bolts on both ends of the T-rail
- Coloured base plate and knobs are available, too
- Other minor improvements that are not listed here
The new design Scorpion MK5 hooks are now in stock.
Reviews
There are no reviews yet.