Additional information
| Weight | 19 g |
|---|---|
| HANDEDNESS |
FWB Loading Port Handle
£19.99
Comfortable handle for the loading port of Feinwerkbau P70 rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.
With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.
The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.
Only logged in customers who have purchased this product may leave a review.
You may also like…
Anti-POI-Shift Rail (for Feinwerkbau / Anschütz)
High quality scope rail for Feinwerkbau or Anschütz PCP rifles. Designed especially to work together with my FWB Anti-POI-Shift Kit, using these products together eliminates the POI-shifts on Feinwerkbau Alutec stocks. I’ve been using the same solution on my rifle, and the last time I zeroed my rifle was in 2012, need to tell anything more?!?
Made of aircraft grade aluminium alloy, black anodised with stainless steel bolts or silver anodised with black bolts. Elevation 35 mm, reproduces the same dovetail on the top as the rifle’s original dovetail. The in-built slope is 0.71% = 24.4 MOA so any simple mount ring will do without shimming.
For a perfect solution please see also:Â FWB Anti-POI-Shift Kit.
FWB Anti-POI-Shift Kit
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
Related Products
Sold
Original price was: £29.99.£19.99Current price is: £19.99.
Out of stock
Hook Offset Plate 20/35mm
Adapter plate for mounting a hook with a certain offset.
Connection to hook: M5 Nyloc nuts, CTC 90mm
Connection to rifle: M5 countersunk holes, CTC 20mm, 70mm and alrogether 90mm
Offset: 20mm or 35mm.
Thick laser sintered Nylon plate, very massive. Polished black surface.
Gripster Hamster
The same hamster (palm shelf, knee rest etc.) design that I use on my own rifle, with 5, 6 or 7 big indents (183 / 217 / 251mm overall length) on the sides for a sure grip in kneeling position or when carrying the rifle.
High quality laser sintered Nylon, lightweight and strong material. Comes with stainless steel bolts and nuts.
Available in two versions (hamster only, or hamster + adapter).
EagleEye Parallax Magnifier
Magnifier for the parallax wheel, fully adjustable, with a lightweight and unbreakable Fresnel lens. Visible lens size 12.5×38.5 mm. Fits to all major scopes, can be folded up for safe carrying.
Please understand that it can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
If you have got a rubber ‘scope enhancer’, you can choose the special ‘Enhancer’ version that is a flexible half cylinder and can be mounted on the rubber enhancer by two massive cable ties.
Check out my new clicks magnifier, too: EagleEye Clicks Magnifier.
New updated ring design: The same function but a much wider adjustment range (40-47mm) and a better looking ring, ocular tube protection, bolt/nut secured against falling out.
Sold
Original price was: £14.99.£9.99Current price is: £9.99.
Select options
This product has multiple variants. The options may be chosen on the product page
EasyPin Pointer
Simple and lightweight scope pointer. Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture.
For 36mm and 40mm tube diameters see EasyPin Extra
For click turrets with a custom made cap, or for sidewheels. With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire. Find out which pointer suits you best: Scope Pointer Comparison Table
NEW: there is an advanced version of this pointer available, too, with adjustable pin angle and also for 36mm and 40mm scope tubes: EasyPin Extra Scope Pointer
FlexiPoint Spare Blades
These items are only spare parts for my trigger system (in black colour only), and allow you to try different surfaces and shapes to make sure, which one fits you the best in practice.
If you’d like to have a complete trigger, please click here: FlexiPoint offset trigger.
For detailed information please click on the tabs below:
Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
- ‘Centre’ gives a d=2 mm sharp point in the middle, giving a very precise feedback of the actual pull weight, the edge gives only a small hint of the right pull direction.
- ‘Deep’ follows the shape of the fingertip, giving a comfortable and evenly distributed contact on the whole surface.
- ‘Edge’ is for those who are after the right pull direction, combined with a comfortable feeling of the deeper middle surface.
- ‘Flat’ feels like a flat surface, simple and precise.
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
ComBrella shade for Combro
Snap-on shade for Combro Chrony
Combro Chronies use IR photodiodes as light source so they don’t need external light, but direct sunshine or fluorescent lights may disturb its function, resulting false readings.
This simple shade can be snapped onto the Chrony and gives an effective shade for the light sensors.
The new extended version connects with a bayonet to the Sniper barrel weight, keeping the chrony on its place, aligned with the barrel.
FolloWing Adapter
Adapter piece to contact your existing FolloWing / SteadyWing / TopWing upper wing extension to another rifle or hook system:
- AirArms EV-2 / FTP-900
- Anschütz 4765 / Precise I
- Brian’s Hook
- Feinwerkbau 603 / P70 / 700 / 800
- Gehmann 809
- Grünig&Elmiger hooks
- MEC Contact-III / Free Position
- Steyr LG-100/110
- System Gemini hook
- TEC-HRO Fusion hook
- Generic adapter A (standard) / B (reverse)
If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own adapter.
All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.
For more information please read the Product Description below.
EagleEye Clicks Magnifier
Magnifier for the clicks turret, fully adjustable, with a lightweight and unbreakable 3x mag Fresnel lens. Visible lens size 28×17 mm. Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes. It can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
Check out its brother, too: EagleEye Parallax Magnifier. Please note that there is a new design that may slightly differ from the pictures.
The magnifiers can be ordered also in ‘Target shooter’ version with two magnifying windows (for elevation and windage turret)
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
Reviews
There are no reviews yet.