Additional information
| Weight | N/A |
|---|---|
| GRIP | Cherrywood ball, Grey anatomic, Both grips |
FWB Stock Middle Parts
Price range: £189.90 through £219.90
Replacement elements for the FWB P70 Alutec stock, giving new features to the rifle:
- Fully adjustable offset grip
- Elevating the rear part by 50 mm
- Saving 250 g weight
Also the original grip can be used (but without the offset feature). The parts are made of laser sintered Nylon, lightweight but very strong, I personally have tested this kit on my rifle. The new design elevates the cheek piece part so it fits better to high FT scopes. The grip is fully adjustable, and the offset can be set between 7.5 and 22.5 mm.
Right handed, used but in “as new” condition, with some very small usage marks. Can be bought with a ball grip and/or with a grey anatomic grip.
In order to use this kit, you have to cut your original stock, and drill 3 new holes onto it, I’ll attach the technical drawings of all these modifications of course.
I can offer a full FWB collection, please contact me for a discounted price if you are interested in the following products together:
- This kit
- FWB Anti-POI-Shift Kit (optionally with FWB Anti-POI-Shift Rail)
- FWB Loading Port Handle
- FlexiPoint Offset Trigger for FWB
- FlexiPoint Additional Trigger Blade
Only logged in customers who have purchased this product may leave a review.
You may also like…
FWB Anti-POI-Shift Kit
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
FlexiPoint Offset Trigger
Precision offset trigger with wide range of adjustments, for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Feinwerkbau (all models)
- Hämmerli AR-20
- Steyr LG-100/110
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
In most cases, it’s recommended to use the genuine FlexiPoint Trigger, because it connects more steady to the rifle action, using both trigger rods (German made rifles) or holding the rod by two grub screws (AirArms). But if you’ve got a custom stock that is too tight for the FlexiPoint trigger, a possible solution is to use a PinPoint trigger with this offset blade. For this option, simply choose PinPoint in ‘Adapter type’ drop-down menu.
If you’re after a simpler trigger which is in the centre or has only a small offset, please have a look at PinPoint v.2 Trigger, too.
Anti-POI-Shift Rail (for Feinwerkbau / Anschütz)
High quality scope rail for Feinwerkbau or Anschütz PCP rifles. Designed especially to work together with my FWB Anti-POI-Shift Kit, using these products together eliminates the POI-shifts on Feinwerkbau Alutec stocks. I’ve been using the same solution on my rifle, and the last time I zeroed my rifle was in 2012, need to tell anything more?!?
Made of aircraft grade aluminium alloy, black anodised with stainless steel bolts or silver anodised with black bolts. Elevation 35 mm, reproduces the same dovetail on the top as the rifle’s original dovetail. The in-built slope is 0.71% = 24.4 MOA so any simple mount ring will do without shimming.
For a perfect solution please see also:Â FWB Anti-POI-Shift Kit.
Related Products
Save up to £5.00!
Price range: £14.99 through £24.99
Select options
This product has multiple variants. The options may be chosen on the product page
EasyPin Extra Pointer
Adjustable angle scope pointer (10°–90° to the scope tube, two positions). Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes, and needs only 10 mm space on the tube. The top is 11.5 mm above the tube in vertical pin position..
For parallax wheels and click turrets.
With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
The 30/34mm new design pointers are available in a ‘Target’ version i.e. with two pointers, one for the elevation turret and another on on the side for the windage turret.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
PinPoint v.2 Trigger
Precision trigger for the following rifles:
- Anschütz
- AirArms Pro-Target / EV-2 / FTP-900
- Daystate Adjustable Trigger
- Feinwerkbau (all models)
- FX Impact
- Hämmerli AR-20
- Steyr LG-100/110
- Suhl 150
- Thomas
- Walther (all models)
The trigger can be ordered with a wide variety of different trigger blades on a bundle price (they can be ordered later on full price here: FlexiPoint spare blades).
Offset 0-10mm to both sides. If you need a trigger with more offset (up to 46 mm!) and much more adjustment options, check out my Flexipoint trigger.
EagleEye Parallax Magnifier
Magnifier for the parallax wheel, fully adjustable, with a lightweight and unbreakable Fresnel lens. Visible lens size 12.5×38.5 mm. Fits to all major scopes, can be folded up for safe carrying.
Please understand that it can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
If you have got a rubber ‘scope enhancer’, you can choose the special ‘Enhancer’ version that is a flexible half cylinder and can be mounted on the rubber enhancer by two massive cable ties.
Check out my new clicks magnifier, too: EagleEye Clicks Magnifier.
New updated ring design: The same function but a much wider adjustment range (40-47mm) and a better looking ring, ocular tube protection, bolt/nut secured against falling out.
Rowan’s Forend (+ Gripster)
Rowan Engineering’s industry standard forend mechanism with full range of the original adapters with an optional Gripster palm shelf, also allowing to connect the JOPA folding bipod (to the 6 or 7 indents versions).
Please allow a couple of days for dispatch this order.
If you are after a smaller and lighter mechanism but with some extra comfort, check out our Gearbox Winding Forend.
The hamster can be bought separately, too: Gripster hamster
Gripster Hamster
The same hamster (palm shelf, knee rest etc.) design that I use on my own rifle, with 5, 6 or 7 big indents (183 / 217 / 251mm overall length) on the sides for a sure grip in kneeling position or when carrying the rifle.
High quality laser sintered Nylon, lightweight and strong material. Comes with stainless steel bolts and nuts.
Available in two versions (hamster only, or hamster + adapter).
Save up to £10.00!
Price range: £64.90 through £79.90
Select options
This product has multiple variants. The options may be chosen on the product page
Atlas Extra Wide FT Bipod
Extra wide bipod for FT rifles. This is not a sniper bipod, its only purpose is to give support between the lanes. FT rifles with their heavy and elevated scopes have a high centre of gravity and need a massive support. The 100mm long legs are wide apart (ball feet 220mm, boot-shaped feet 240mm) so it’s quite hard to knock over the rifle. Update: longer leg versions are available on backorder.
Clearing below the stock is about 80mm. Future versions with longer legs will be available
There are two main variations:
- Thumb screw: Connects to all UIT accessory rails with a T-nut and a thumb screw
- Quick release: A separate part connects to the stock permanently, either with T-nuts (for UIT accessory rails) or with built-in M5 nuts (for direct mounting on wooden stocks). The bipod slides onto this base part and clicks into its place.
Both variations can have these 4 leg types:
- Black Plastic Ball: A simple 20mm black plastic ball with brass threaded insert
- Stainless Steel Ball: Solid stainless steel 20mm bearing ball, looks nice shiny and lowers the centre of gravity
- FT Caterpillar Boot: Big (25x50mm) curved surface with grooves, a solid support on all terrain, this is a real workhorse and I recommend this for FT
- Self-Levelling Flat: 20x40mm flat feet that is self-levelling within ±10°, this is more delicate so it is recommended for mostly dry conditions
Save up to £10.00!
Price range: £69.90 through £84.90
Select options
This product has multiple variants. The options may be chosen on the product page
FolloWing MK5 / SteadyWing MK5 Hook Extensions
NEW DESIGN: The MK5 version of the well known FolloWing and SteadyWing systems.
These parts are actually the very same as the upper wings of the Scorpion MK5 FT Hook, and have a massive adapter that connects them to the original hook.
- High quality laser sintered Nylon, polished and dyed ‘carbon black’ finish, stainless steel bolts and nuts.
- Lightweight structure with a lot of adjustments
- All adjustments are available even in shooting position
- The links can be bent and twisted, too
- Engraved marks for all adjustments – you can record and reproduce your settings any time
- Rounded link elements – gives a smoother fit when the links are twisted
- Fully re-designed system, with a massive cogs style connection instead of the weak link
- True L/H version fully mirrored in every function, and now available in all variations
- Please contact me with any questions, I can design any custom part or modify the existing ones, according to your needs.
Adapters in stock:
- AirArms FTP-900
- AirArms XTi-50
- Anschütz 4765
- MEC Free Position
- Universal Converter for all old FW/SW/TW adapters
Adapters available on backorder:
If you can’t wait a couple of weeks for the backorder, you may consider ordering the hook extension with the ‘Universal Converter’ and add an old style FolloWing adapter to the cart.
- AirArms EV-2Â
- Anschütz Precise I
- Anschütz ONE
- Feinwerkbau 603 / P70 / 700 / 800
- Gehmann 809
- Grünig&Elmiger hooks
- MEC Contact-III
- Steyr LG-100/110
- System Gemini hook
- TEC-HRO Fusion hook
- Generic adapter A (standard) / B (reversed)
All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.
WonderBar adjustable spacers (in pair)
A pair of two specially formed adjustable spacers that can connect to each other in four different heights:
Useful for spacing butt-hooks, hamsters and other rifle parts.
Prices stand for a pair of spacers.
LAST ONES!
Reviews
There are no reviews yet.