Additional information
| Weight | 299 g |
|---|
Sold
FWB Woodwork
Original price was: £160.00.£99.90Current price is: £99.90.
Original wooden parts for FWB P70 Match/FT Alutec stock:
– Grip: R/H size L, with two threaded nuts at the bottom for mounting an additional palm shelf,
– Cheek piece: prone style (symmetric),
Colours: beech/red laminate.
All in good condition, with a few minor marks from usage, as seen on the photos.
To be sold only together.
See also: other Feinwerkbau related products
Out of stock
Only logged in customers who have purchased this product may leave a review.
Related Products
Sold
Original price was: £14.99.£9.99Current price is: £9.99.
Select options
This product has multiple variants. The options may be chosen on the product page
EasyPin Pointer
Simple and lightweight scope pointer. Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture.
For 36mm and 40mm tube diameters see EasyPin Extra
For click turrets with a custom made cap, or for sidewheels. With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire. Find out which pointer suits you best: Scope Pointer Comparison Table
NEW: there is an advanced version of this pointer available, too, with adjustable pin angle and also for 36mm and 40mm scope tubes: EasyPin Extra Scope Pointer
Scorpion FT Hook Extras MK4
Extras and spare/replacement parts for the old Scorpion MK4 FT hook system.
Scorpion MK5 extra parts are here: Scorpion FT Hook Extras MK5
Fitting the hook to different stocks: see Scorpion Base Plates
FWB Stock Middle Parts
Replacement elements for the FWB P70 Alutec stock, giving new features to the rifle:
- Fully adjustable offset grip
- Elevating the rear part by 50 mm
- Saving 250 g weight
Also the original grip can be used (but without the offset feature). The parts are made of laser sintered Nylon, lightweight but very strong, I personally have tested this kit on my rifle. The new design elevates the cheek piece part so it fits better to high FT scopes. The grip is fully adjustable, and the offset can be set between 7.5 and 22.5 mm.
Right handed, used but in “as new” condition, with some very small usage marks. Can be bought with a ball grip and/or with a grey anatomic grip.
In order to use this kit, you have to cut your original stock, and drill 3 new holes onto it, I’ll attach the technical drawings of all these modifications of course.
I can offer a full FWB collection, please contact me for a discounted price if you are interested in the following products together:
- This kit
- FWB Anti-POI-Shift Kit (optionally with FWB Anti-POI-Shift Rail)
- FWB Loading Port Handle
- FlexiPoint Offset Trigger for FWB
- FlexiPoint Additional Trigger Blade
FWB Loading Port Handle
Comfortable handle for the loading port of Feinwerkbau P70 rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.
With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.
The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.
FlexiPoint Spare Blades
These items are only spare parts for my trigger system (in black colour only), and allow you to try different surfaces and shapes to make sure, which one fits you the best in practice.
If you’d like to have a complete trigger, please click here: FlexiPoint offset trigger.
For detailed information please click on the tabs below:
Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
- ‘Centre’ gives a d=2 mm sharp point in the middle, giving a very precise feedback of the actual pull weight, the edge gives only a small hint of the right pull direction.
- ‘Deep’ follows the shape of the fingertip, giving a comfortable and evenly distributed contact on the whole surface.
- ‘Edge’ is for those who are after the right pull direction, combined with a comfortable feeling of the deeper middle surface.
- ‘Flat’ feels like a flat surface, simple and precise.
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
WonderBar adjustable spacers (in pair)
A pair of two specially formed adjustable spacers that can connect to each other in four different heights:
Useful for spacing butt-hooks, hamsters and other rifle parts.
Prices stand for a pair of spacers.
LAST ONES!
FWB Anti-POI-Shift Kit
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
Sold
Original price was: £89.99.£64.99Current price is: £64.99.
Select options
This product has multiple variants. The options may be chosen on the product page
GAPacity Sidewheel + Free Pointer
This product has been discontinued. Check out the new design, the Composite series:
- Composite Parallax Wheels: 125mm and 150mm DualCore (round centered/excentric), 225mm effective diameter comma wheel.
- Composite Click Turret: 54 mm oversized turret, resettable without tool, wit or without bottoming ring.
- Composite Zoom Lever: stylish and handy zoom lever.
- All three in a bundle on a reduced price: Composite Scope Kit
Reviews
There are no reviews yet.