Additional information
| Weight | N/A |
|---|---|
| CONNECTION | Standard dovetail, 1"scope tube, 30mm scope tube, 34mm scope tube |
| DESIGN | Old design, New design |
Save up to £10.00!
TrueLevel Adjustable Bubble Level
Price range: £19.99 through £34.99
Get your rifle into a true level with these adjustable bubble level bases: you can fine tune its angle and eliminate canting effects.
It comes complete with a bubble level and connects:
- to the rifle with a standard dovetail (10mm wide at the neck but the material is easy to carve if needed), or
- to the scope with a 1″ / 30mm / 34mm ring.
Please check before buying that there is enough space for this part on your rifle. The rings need a 10mm wide spece on your scope tube, and the dovetail based unit requires at least 25mm above the top of the dovetail.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
Only logged in customers who have purchased this product may leave a review.
You may also like…
Save up to £30.00!
Price range: £99.99 through £169.99
Select options
This product has multiple variants. The options may be chosen on the product page
Gearbox Winding Forend
The forend you have always wanted:
- Continuous height adjustment between 45-105mm
- Just wind the handle, even while aiming
- Self-locking in any position
- For right and left handed use
- Lightweight, only 170g / 290g (Original / Duplex)
If you are after something much bigger, made of metal and with traditional adjustments, check out our Rowan’s Forend + Gripster combination.
Related Products
Sniper Barrel Weight
Flat barrel weight for Feinwerkbau / Anschütz rifles. The same weight (79 g) as the original FWB aluminium barrel weight but allows using longer cylinders – it is only 1 mm thick below and above the barrel. Laser sintered Nylon, with stainless steel grub screw. The M6 threaded holes at the bottom allow you to add up to 10 grub screws to fine tune the total weight and its distribution. The barrel weight aligns itself to the dovetail at the end of FWB barrel. It clamps onto the barrel only with Nylon parts so doesn’t scratch the barrel surface.
New: available also for Daystate Griffin, everything the same as above.
New version: Similar for Steyr but longer, with three air stripper plates as well. ComBrella can’t be connected to this model.
Intimidate your opponents with a rifle that looks like a .50 cal sniper gun! ;-)
Now you can have it with the ComBrella shade that can hold a Combro chrony and connects with a bayonet to the barrel weight, keeping the chrony on its place, aligned with the barrel and protecting it from the sunlight.
It can be ordered with a built-in folding windicator, too.
FlexiPoint Spare Blades
These items are only spare parts for my trigger system (in black colour only), and allow you to try different surfaces and shapes to make sure, which one fits you the best in practice.
If you’d like to have a complete trigger, please click here: FlexiPoint offset trigger.
For detailed information please click on the tabs below:
Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
- ‘Centre’ gives a d=2 mm sharp point in the middle, giving a very precise feedback of the actual pull weight, the edge gives only a small hint of the right pull direction.
- ‘Deep’ follows the shape of the fingertip, giving a comfortable and evenly distributed contact on the whole surface.
- ‘Edge’ is for those who are after the right pull direction, combined with a comfortable feeling of the deeper middle surface.
- ‘Flat’ feels like a flat surface, simple and precise.
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
Save up to £15.00!
Price range: £14.99 through £43.99
Select options
This product has multiple variants. The options may be chosen on the product page
SmartPin Adjustable Pointer
Precisely adjustable pointer for reading the parallax wheels in different conditions. For temperature shifting scopes, light/dark environments, old eyes etc.
Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes or 42-43 mm ocular tubes for shark fin wheels – and needs only 10×10 mm space in width and length as seen on the picture. With stainless steel screws and steel pins.
This pointer can be adjusted within 20 mm or 30 mm with a thumb screw, allowing precise and repeatable positioning of the pointer. The scale has 2 mm divisions. No need to fix and release, the pin has got some friction so it always stays where you set it with the screw, no accidental move (by your shooting jacket or rifle case).
The adjustable pointer comes with an additional pin 3 mm under the other one, for combining the effects (e.g. use the screw adjustment of the pointer to compensate scope temp shift and use the two pins for light and dark targets). If you need a longer or shaped pin, you can simply replace the original steel pins with any <1mm wire or paper clip.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
For combinations with other scope ring features, see Every Possible (And Impossible) Scope Ring Combination.
EagleEye Parallax Magnifier
Magnifier for the parallax wheel, fully adjustable, with a lightweight and unbreakable Fresnel lens. Visible lens size 12.5×38.5 mm. Fits to all major scopes, can be folded up for safe carrying.
Please understand that it can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
If you have got a rubber ‘scope enhancer’, you can choose the special ‘Enhancer’ version that is a flexible half cylinder and can be mounted on the rubber enhancer by two massive cable ties.
Check out my new clicks magnifier, too: EagleEye Clicks Magnifier.
New updated ring design: The same function but a much wider adjustment range (40-47mm) and a better looking ring, ocular tube protection, bolt/nut secured against falling out.
Folding Windicator / Alligator Clip
Professional folding windicator with orange Nylon cord or alligator clips. Fits to any barrel or air cylinder (with the included adapter), 11mm dovetails, Picatinny/Weaver rails, standard UIT accessory rails, 1″ (25.4mm), 30mm and 34mm scope tubes.
The arm clicks into position when folded in or out (except for the scope ring versions). Ready to use with cable ties / bolts and cord, but of course you can replace the cord any time you like. Unbreakable, flexible, and only 7 grams. Made of high quality laser sintered Nylon, stainless steel nut and bolt.
NEW: also available with new design scope rings. For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
NEW: all the windicators are available with alligator clips, too. See the options below.
FWB Anti-POI-Shift Kit
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
Sold
£34.99
Out of stock
Barrel Weight 19.91mm
Genuine Feinwerkbau P70FT barrel weight, may fit other rifles, too  (please check the diameter of your barrel before ordering).
With an extra M6 hole for a windicator.
Aluminum, 77g and the inside diameter is 19.91mm
FWB Loading Port Handle
Comfortable handle for the loading port of Feinwerkbau P70 rifles. Replaces the original ugly white handle with a much better one. In R/H and L/H versions, made of laser sintered Nylon with stainless steel screws.
With this, you can close the loading port by rotating the handle easily by the two rounded ends, instead of pushing it down with a quite big force.
The handle is combined with an automated safety mark: when the loading port is open, a piece of flexible cable tie blocks your trigger finger, but goes out of the way when the port is closed.
Reviews
There are no reviews yet.