Additional information
| Weight | 77 g |
|---|---|
| Dimensions | 125 × 27 × 27 mm |
Sold
Barrel Weight 19.91mm
£34.99
Genuine Feinwerkbau P70FT barrel weight, may fit other rifles, too (please check the diameter of your barrel before ordering).
With an extra M6 hole for a windicator.
Aluminum, 77g and the inside diameter is 19.91mm
Out of stock
Only logged in customers who have purchased this product may leave a review.
You may also like…
Sniper Barrel Weight
Flat barrel weight for Feinwerkbau / Anschütz rifles. The same weight (79 g) as the original FWB aluminium barrel weight but allows using longer cylinders – it is only 1 mm thick below and above the barrel. Laser sintered Nylon, with stainless steel grub screw. The M6 threaded holes at the bottom allow you to add up to 10 grub screws to fine tune the total weight and its distribution. The barrel weight aligns itself to the dovetail at the end of FWB barrel. It clamps onto the barrel only with Nylon parts so doesn’t scratch the barrel surface.
New: available also for Daystate Griffin, everything the same as above.
New version: Similar for Steyr but longer, with three air stripper plates as well. ComBrella can’t be connected to this model.
Intimidate your opponents with a rifle that looks like a .50 cal sniper gun! ;-)
Now you can have it with the ComBrella shade that can hold a Combro chrony and connects with a bayonet to the barrel weight, keeping the chrony on its place, aligned with the barrel and protecting it from the sunlight.
It can be ordered with a built-in folding windicator, too.
Sold
£29.99
Out of stock
Barrel Weight 17.22mm
Genuine Walther LGR barrel weight, may fit other rifles, too (please check the diameter of your barrel before ordering).
Steel, 271g and the inside diameter is 17.22mm.
Related Products
WonderBar adjustable spacers (in pair)
A pair of two specially formed adjustable spacers that can connect to each other in four different heights:
Useful for spacing butt-hooks, hamsters and other rifle parts.
Prices stand for a pair of spacers.
LAST ONES!
Sold
Original price was: £89.99.£64.99Current price is: £64.99.
Select options
This product has multiple variants. The options may be chosen on the product page
GAPacity Sidewheel + Free Pointer
This product has been discontinued. Check out the new design, the Composite series:
- Composite Parallax Wheels: 125mm and 150mm DualCore (round centered/excentric), 225mm effective diameter comma wheel.
- Composite Click Turret: 54 mm oversized turret, resettable without tool, wit or without bottoming ring.
- Composite Zoom Lever: stylish and handy zoom lever.
- All three in a bundle on a reduced price: Composite Scope Kit
Save up to £10.00!
Price range: £19.99 through £34.99
Select options
This product has multiple variants. The options may be chosen on the product page
TrueLevel Adjustable Bubble Level
Get your rifle into a true level with these adjustable bubble level bases: you can fine tune its angle and eliminate canting effects.
It comes complete with a bubble level and connects:
- to the rifle with a standard dovetail (10mm wide at the neck but the material is easy to carve if needed), or
- to the scope with a 1″ / 30mm / 34mm ring.
Please check before buying that there is enough space for this part on your rifle. The rings need a 10mm wide spece on your scope tube, and the dovetail based unit requires at least 25mm above the top of the dovetail.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
Sold
Original price was: £14.99.£9.99Current price is: £9.99.
Select options
This product has multiple variants. The options may be chosen on the product page
EasyPin Pointer
Simple and lightweight scope pointer. Fits to all 1″ / 30 mm / 34 mm scope tubes, and needs only 10×10 mm space in width and length as seen on the picture.
For 36mm and 40mm tube diameters see EasyPin Extra
For click turrets with a custom made cap, or for sidewheels. With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire. Find out which pointer suits you best: Scope Pointer Comparison Table
NEW: there is an advanced version of this pointer available, too, with adjustable pin angle and also for 36mm and 40mm scope tubes: EasyPin Extra Scope Pointer
Sold
Price range: £59.99 through £129.99
Select options
This product has multiple variants. The options may be chosen on the product page
DualCore Sidewheel + SmartPin Pointer
A unique parallax wheel with two centres: can be used in centered or in excentric position, wide space for the scale, strong and unbreakable. See the details at the bottom on the page.
This sidewheel has been designed on a way, that it will fit to the scope and to my SmartPin Pointer and ProTurret Click Knob as well. If you order only a sidewheel, please make sure that it does not clash with the third party accessories. If you have any questions, please contact me before placing an order.
The pointers fit perfectly to my sidewheel. The ring size will be automatically selected according to your scope’s tube diameter. If you want me to send a pointer with an extended scale (10 mm more travel for the pin/stripe), please select your pointer type here and add 5 pounds to the order by using the Additional Payment page.
Made of strong UV-stable ASA polymer (professionally polished), with stainless steel screws. Please note that I have slightly modified the design, certain wheels may differ in smaller details compared to the photos.
This product has been discontinued, check out the new design, the Composite series:
- Composite Parallax Wheels: 125mm and 150mm DualCore (round centered/excentric), 225mm effective diameter comma wheel.
- Composite Click Turret: 54 mm oversized turret, resettable without tool, wit or without bottoming ring.
- Composite Zoom Lever: stylish and handy zoom lever.
- All three in a bundle on a reduced price: Composite Scope Kit
Sold
£89.90
Select options
This product has multiple variants. The options may be chosen on the product page
JOPA Folding Bipod
Folding bipod, made of quality materials. Body: black or silver anodised aluminium alloy, legs: 5mm stainless steel with 20mm black plastic balls.
Long legs (12.5cm = 5″ between the ground and the rifle’s stock)
Fits to all rifles with standard accessory rail or similar (AirArms, Anschütz, Walther, Steyr, Feinwerkbau, Hämmerli etc.)
Sorry this product is discontinued but now I have two black ex demo pieces available, been used for a couple of competitions, photo sessions and as a demo when selling other ones on international competitions. In excellent condition, only with a few marks from being mounted onto a rifle.
These are the very last ones of the JOPA series.
Check out my new Atlas Extra Wide FT Bipod
InkWell for Pellet Sizer
Pellet collector for pellet sizers. Please note that the pellet sizer is NOT included, it has to be bought separately from UK Neil or other manufacturers.
Can collect about 300 pellets. If you take the bottom plate off, will fit firmly into a tin so you can size the pellets directly into the tin.
High quality laser sintered Nylon (black dyed and polished), stainless steel screws.
Some words from the product’s first user: “A great product. Very light. The UK Neil sizer slides into the ink well holder for a perfectly snug fit. Enables speedy sizing and any pellets dropped fall onto the top of the well. This stops the odd dropped pellet falling into your sized pellets by mistake. Perfect.“
And a short review on Youtube from another customer: https://youtu.be/DlvtUxTHPSs?t=343
Folding Windicator / Alligator Clip
Professional folding windicator with orange Nylon cord or alligator clips. Fits to any barrel or air cylinder (with the included adapter), 11mm dovetails, Picatinny/Weaver rails, standard UIT accessory rails, 1″ (25.4mm), 30mm and 34mm scope tubes.
The arm clicks into position when folded in or out (except for the scope ring versions). Ready to use with cable ties / bolts and cord, but of course you can replace the cord any time you like. Unbreakable, flexible, and only 7 grams. Made of high quality laser sintered Nylon, stainless steel nut and bolt.
NEW: also available with new design scope rings. For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
NEW: all the windicators are available with alligator clips, too. See the options below.
Reviews
There are no reviews yet.