Additional information
| Weight | 73 g |
|---|
SC Long Hook MK4
£39.99
Available on back-order
Related Products
Save up to £30.00!
Price range: £99.99 through £169.99
Select options
This product has multiple variants. The options may be chosen on the product page
Gearbox Winding Forend
The forend you have always wanted:
- Continuous height adjustment between 45-105mm
- Just wind the handle, even while aiming
- Self-locking in any position
- For right and left handed use
- Lightweight, only 170g / 290g (Original / Duplex)
If you are after something much bigger, made of metal and with traditional adjustments, check out our Rowan’s Forend + Gripster combination.
Sold
Original price was: £29.99.£19.99Current price is: £19.99.
Out of stock
Hook Offset Plate 20/35mm
Adapter plate for mounting a hook with a certain offset.
Connection to hook: M5 Nyloc nuts, CTC 90mm
Connection to rifle: M5 countersunk holes, CTC 20mm, 70mm and alrogether 90mm
Offset: 20mm or 35mm.
Thick laser sintered Nylon plate, very massive. Polished black surface.
FolloWing Adapter
Adapter piece to contact your existing FolloWing / SteadyWing / TopWing upper wing extension to another rifle or hook system:
- AirArms EV-2 / FTP-900
- Anschütz 4765 / Precise I
- Brian’s Hook
- Feinwerkbau 603 / P70 / 700 / 800
- Gehmann 809
- Grünig&Elmiger hooks
- MEC Contact-III / Free Position
- Steyr LG-100/110
- System Gemini hook
- TEC-HRO Fusion hook
- Generic adapter A (standard) / B (reverse)
If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own adapter.
All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.
For more information please read the Product Description below.
FWB Anti-POI-Shift Kit
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
Sold
£89.90
Select options
This product has multiple variants. The options may be chosen on the product page
JOPA Folding Bipod
Folding bipod, made of quality materials. Body: black or silver anodised aluminium alloy, legs: 5mm stainless steel with 20mm black plastic balls.
Long legs (12.5cm = 5″ between the ground and the rifle’s stock)
Fits to all rifles with standard accessory rail or similar (AirArms, Anschütz, Walther, Steyr, Feinwerkbau, Hämmerli etc.)
Sorry this product is discontinued but now I have two black ex demo pieces available, been used for a couple of competitions, photo sessions and as a demo when selling other ones on international competitions. In excellent condition, only with a few marks from being mounted onto a rifle.
These are the very last ones of the JOPA series.
Check out my new Atlas Extra Wide FT Bipod
Scorpion Inline Monopod
Special T-rail for all (old MK4 and new MK5 design) Scorpion hooks with an integrated inline monopod.
- Seamless integration into all Scorpion systems
- The support is exactly in the centre line
- Thumb screw can be mounted on either side, for right and left handed shooters
- Simple rubber button or spectacular ball joint foot variations
- Tall hyperboloid grip for quick settings or wide screw for accurate positioning
- MK5 Limiter bolt at the top
- Adds +10mm to the rifle length (compared to a standard Scorpion T-rail)
- Rail length 134mm, total length 150mm
- Lead screw length 150mm (12/31mm is within the foot, and at least 20mm has to remain in the T-rail)
- High quality laser sintered Nylon, polished black, with stainless steel screws, rubber foot surface
Available on a discounted price when bought with a new MK5 Scorpion hook.
Gripster Hamster
The same hamster (palm shelf, knee rest etc.) design that I use on my own rifle, with 5, 6 or 7 big indents (183 / 217 / 251mm overall length) on the sides for a sure grip in kneeling position or when carrying the rifle.
High quality laser sintered Nylon, lightweight and strong material. Comes with stainless steel bolts and nuts.
Available in two versions (hamster only, or hamster + adapter).
Scorpion FT Hook Extras MK4
Extras and spare/replacement parts for the old Scorpion MK4 FT hook system.
Scorpion MK5 extra parts are here: Scorpion FT Hook Extras MK5
Fitting the hook to different stocks: see Scorpion Base Plates