Additional information
| Weight | 295 g |
|---|
Rowan’s Forend (+ Gripster)
£299.95
Rowan Engineering’s industry standard forend mechanism with full range of the original adapters with an optional Gripster palm shelf, also allowing to connect the JOPA folding bipod (to the 6 or 7 indents versions).
Please allow a couple of days for dispatch this order.
If you are after a smaller and lighter mechanism but with some extra comfort, check out our Gearbox Winding Forend.
The hamster can be bought separately, too: Gripster hamster
Available on back-order
Only logged in customers who have purchased this product may leave a review.
You may also like…
Save up to £30.00!
Price range: £99.99 through £169.99
Select options
This product has multiple variants. The options may be chosen on the product page
Gearbox Winding Forend
The forend you have always wanted:
- Continuous height adjustment between 45-105mm
- Just wind the handle, even while aiming
- Self-locking in any position
- For right and left handed use
- Lightweight, only 170g / 290g (Original / Duplex)
If you are after something much bigger, made of metal and with traditional adjustments, check out our Rowan’s Forend + Gripster combination.
Gripster Hamster
The same hamster (palm shelf, knee rest etc.) design that I use on my own rifle, with 5, 6 or 7 big indents (183 / 217 / 251mm overall length) on the sides for a sure grip in kneeling position or when carrying the rifle.
High quality laser sintered Nylon, lightweight and strong material. Comes with stainless steel bolts and nuts.
Available in two versions (hamster only, or hamster + adapter).
Related Products
Save up to £10.00!
Price range: £69.90 through £84.90
Select options
This product has multiple variants. The options may be chosen on the product page
FolloWing MK5 / SteadyWing MK5 Hook Extensions
NEW DESIGN: The MK5 version of the well known FolloWing and SteadyWing systems.
These parts are actually the very same as the upper wings of the Scorpion MK5 FT Hook, and have a massive adapter that connects them to the original hook.
- High quality laser sintered Nylon, polished and dyed ‘carbon black’ finish, stainless steel bolts and nuts.
- Lightweight structure with a lot of adjustments
- All adjustments are available even in shooting position
- The links can be bent and twisted, too
- Engraved marks for all adjustments – you can record and reproduce your settings any time
- Rounded link elements – gives a smoother fit when the links are twisted
- Fully re-designed system, with a massive cogs style connection instead of the weak link
- True L/H version fully mirrored in every function, and now available in all variations
- Please contact me with any questions, I can design any custom part or modify the existing ones, according to your needs.
Adapters in stock:
- AirArms FTP-900
- AirArms XTi-50
- Anschütz 4765
- MEC Free Position
- Universal Converter for all old FW/SW/TW adapters
Adapters available on backorder:
If you can’t wait a couple of weeks for the backorder, you may consider ordering the hook extension with the ‘Universal Converter’ and add an old style FolloWing adapter to the cart.
- AirArms EV-2
- Anschütz Precise I
- Anschütz ONE
- Feinwerkbau 603 / P70 / 700 / 800
- Gehmann 809
- Grünig&Elmiger hooks
- MEC Contact-III
- Steyr LG-100/110
- System Gemini hook
- TEC-HRO Fusion hook
- Generic adapter A (standard) / B (reversed)
All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.
FlexiPoint Spare Blades
These items are only spare parts for my trigger system (in black colour only), and allow you to try different surfaces and shapes to make sure, which one fits you the best in practice.
If you’d like to have a complete trigger, please click here: FlexiPoint offset trigger.
For detailed information please click on the tabs below:
Ball trigger with a 5 and an 8 mm ball on the two ends. Ball triggers are fine because you’ll always have the same trigger weight, but it’s a severe problem that you can’t feel the direction of the pull. If you ask me, you should rather choose a round trigger instead from my standard blades, it’s much better. This Ball trigger is available in Offset version, too.
Small horizontal trigger with pyramids on both sides (fine and coarse). Similar to the ball but you can feel the direction of the pull.
These blades have a big round surface that fits to the fingertip. There are four different surfaces, they look quite similar but each version gives a totally different feel on the trigger, so you can choose the one that fits to your shooting style the best.
- ‘Centre’ gives a d=2 mm sharp point in the middle, giving a very precise feedback of the actual pull weight, the edge gives only a small hint of the right pull direction.
- ‘Deep’ follows the shape of the fingertip, giving a comfortable and evenly distributed contact on the whole surface.
- ‘Edge’ is for those who are after the right pull direction, combined with a comfortable feeling of the deeper middle surface.
- ‘Flat’ feels like a flat surface, simple and precise.
Traditional straight and curved blades, 8mm wide, 20mm high surface with vertical grooves, the middle height is marked with a horizontal groove.
WonderBar adjustable spacers (in pair)
A pair of two specially formed adjustable spacers that can connect to each other in four different heights:
Useful for spacing butt-hooks, hamsters and other rifle parts.
Prices stand for a pair of spacers.
LAST ONES!
Save up to £5.00!
Price range: £14.99 through £24.99
Select options
This product has multiple variants. The options may be chosen on the product page
EasyPin Extra Pointer
Adjustable angle scope pointer (10°–90° to the scope tube, two positions). Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes, and needs only 10 mm space on the tube. The top is 11.5 mm above the tube in vertical pin position..
For parallax wheels and click turrets.
With stainless steel screws and steel pin. If you need a longer or shaped pin, you can simply replace the original pin with any <1mm wire.
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
The 30/34mm new design pointers are available in a ‘Target’ version i.e. with two pointers, one for the elevation turret and another on on the side for the windage turret.
For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination.
FWB Anti-POI-Shift Kit
The FWB Anti-POI-Shift Kit stands of two laser sintered Nylon parts, they look the same but they’re a bit different inside:
- One of them replaces the original A-clamp and holds only the cylinder and protects the barrel from accidental kicks but lets it free float.
- The other one goes to the joint of the air cylinder and the reg. It can be fixed onto the barrel by two symmetrical grub screws that push small Nylon parts to the barrel and thus don’t scratch its surface.
With stainless steel screws, all secured against falling out. Easy mounting (you’ll have to drill only a 5 mm hole).
For a perfect solution please see also: FWB Anti-POI-Shift Rail
Save up to £20.00!
Price range: £109.90 through £189.90
Select options
This product has multiple variants. The options may be chosen on the product page
Scorpion Fully Adjustable FT Hook – MK5 New Design
Fully adjustable Field Target hook, with much more versatility than the usual Gemini clones. Everything can be adjusted even in the shooting position, without disassembling the hook. Modular system that can be upgraded later if needed. Massive construction, without any flex and slip, a lightweight and versatile alternative to the traditional metal hooks.
For additional extras and spare parts please see Scorpion FT Hook Extras
Fitting the hook to different stocks: see Scorpion Base Plates
The last couple of old design Scorpion MK4 hooks (R/H and true L/H) are available here: Scorpion MK4 on SALE
Scorpion MK5 New Design
I added a lot of improvements to my professional FT hook design, creating the MK5 (2023) version that will replace the discontinued MK4 (2016-2022) version. Some parts are backwards compatible with the MK4 so the two systems can be combined if you don’t mind some visual differences but I’d suggest not to mix the two systems.
Features on the new MK5 design (see detailed listing with photos and dimensions at the bottom of the web page):
- Engraved marks for all adjustments – now you can record and reproduce your settings any time
- New 152mm stainless steel hook, 137mm and 97mm Nylon FT-hooks
- HFT-compatible 2.25” (57mm) Nylon hook
- Extended upper wing base option, for better integration with the Butt Pad Kit or to add half a link length to the upper wing
- Slim hook holder links – don’t protrude that much as the old design
- Rounded link elements – gives a smoother fit when the links are twisted
- HFT-compatible 2.25” (57mm) extended one-piece upper wing
- Fully re-designed FolloWing articulated wing – with the massive cogs style connection instead of the weak link
- Dual or single thumb screw variations for FT shooters
- Dual or single bolt variations for HFT and other disciplines where a quick adjustment is not needed
- Three T-Rail versions: 130mm, 150mm and NEW: 150mm with integrated inline monopod
- 3-position limiter bolts on both ends of the T-rail
- Coloured base plate and knobs are available, too
- Other minor improvements that are not listed here
The new design Scorpion MK5 hooks are now in stock.
FolloWing Adapter
Adapter piece to contact your existing FolloWing / SteadyWing / TopWing upper wing extension to another rifle or hook system:
- AirArms EV-2 / FTP-900
- Anschütz 4765 / Precise I
- Brian’s Hook
- Feinwerkbau 603 / P70 / 700 / 800
- Gehmann 809
- Grünig&Elmiger hooks
- MEC Contact-III / Free Position
- Steyr LG-100/110
- System Gemini hook
- TEC-HRO Fusion hook
- Generic adapter A (standard) / B (reverse)
If you can’t find your hook here, don’t worry! Please contact me with your rifle details and I’ll design your own adapter.
All versions come with appropriate stainless steel bolts and nuts and are ready to connect to your hook.
For more information please read the Product Description below.
Save up to £10.00!
Price range: £64.90 through £79.90
Select options
This product has multiple variants. The options may be chosen on the product page
Atlas Extra Wide FT Bipod
Extra wide bipod for FT rifles. This is not a sniper bipod, its only purpose is to give support between the lanes. FT rifles with their heavy and elevated scopes have a high centre of gravity and need a massive support. The 100mm long legs are wide apart (ball feet 220mm, boot-shaped feet 240mm) so it’s quite hard to knock over the rifle. Update: longer leg versions are available on backorder.
Clearing below the stock is about 80mm. Future versions with longer legs will be available
There are two main variations:
- Thumb screw: Connects to all UIT accessory rails with a T-nut and a thumb screw
- Quick release: A separate part connects to the stock permanently, either with T-nuts (for UIT accessory rails) or with built-in M5 nuts (for direct mounting on wooden stocks). The bipod slides onto this base part and clicks into its place.
Both variations can have these 4 leg types:
- Black Plastic Ball: A simple 20mm black plastic ball with brass threaded insert
- Stainless Steel Ball: Solid stainless steel 20mm bearing ball, looks nice shiny and lowers the centre of gravity
- FT Caterpillar Boot: Big (25x50mm) curved surface with grooves, a solid support on all terrain, this is a real workhorse and I recommend this for FT
- Self-Levelling Flat: 20x40mm flat feet that is self-levelling within ±10°, this is more delicate so it is recommended for mostly dry conditions
Reviews
There are no reviews yet.