You must select at least 1 choice for TRIGGER BLADES.
"TRIGGER BLADES" is a required field.
Save up to £10.00!
Scorpion FT Hook Extras MK5
£14.99–£87.49Price range: £14.99 through £87.49
Extras and spare/replacement parts for the Scorpion MK5 FT hook system.
Maestro Design’s Scorpion is a fully modular sytem and most parts can be replaced or parts added if needed. All the available parts are listed here. If you have an old design MK4 Scorpion then start searching spare parts here. Nevertheless, most of the the MK5 parts are compatible with the old system as follows:
Fully compatible with MK4:
Butt Pad Kit (adds two pads to the centre post)
Middle Extension Kit (adds 10-20-30 mm to the centre post)
Offset Plates (0-25mm or 10-50mm) to add an offset tot he whole hook
Does work with MK4, but looks a bit different or certain features are limited:
Wing Base, Standard
Wing Base, Extended (adds 25mm to the upper wing, recommended for Butt Pad Kit)
Extra Link 44mm
Wing, Standard
Wing, Extended HFT 2.25″
FolloWing Articulated Wing
T-Rail Limiters (with a 3-way limiter on both ends) 130mm or 150mm
if you want to use your hook on another rifle, don’t forget to order a base plate, too!
NOT compatible with MK4:
Long Hook, Stainless 152mm
Long Hook, Nylon 137 mm
Short Hook, Nylon 97 mm
HFT 2.25″ Hook, Nylon 57 mm
Some parts are suitable for both right and left handed hooks. but some parts have R/H and L/H versions, please double check that you have selected the appropriate one.
These parts can be bought separately, so you can buy a basic hook and then get the needed extras later, when you already know from practice what you need exactly.
Fully compatible with MK4:
Butt Pad Kit (adds two pads to the centre post)
Middle Extension Kit (adds 10-20-30 mm to the centre post)
Offset Plates (0-25mm or 10-50mm) to add an offset tot he whole hook
Does work with MK4, but looks a bit different or certain features are limited:
Wing Base, Standard
Wing Base, Extended (adds 25mm to the upper wing, recommended for Butt Pad Kit)
Extra Link 44mm
Wing, Standard
Wing, Extended HFT 2.25″
FolloWing Articulated Wing
T-Rail Limiters (with a 3-way limiter on both ends) 130mm or 150mm
if you want to use your hook on another rifle, don’t forget to order a base plate, too!
NOT compatible with MK4:
Long Hook, Stainless 152mm
Long Hook, Nylon 137 mm
Short Hook, Nylon 97 mm
HFT 2.25″ Hook, Nylon 57 mm
Additional information
Weight
360 g
Dimensions
200 × 46 × 245 mm
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Fully adjustable Field Target hook, with much more versatility than the usual Gemini clones. Everything can be adjusted even in the shooting position, without disassembling the hook. Modular system that can be upgraded later if needed. Massive construction, without any flex and slip, a lightweight and versatile alternative to the traditional metal hooks.
I added a lot of improvements to my professional FT hook design, creating the MK5 (2023) version that will replace the discontinued MK4 (2016-2022) version. Some parts are backwards compatible with the MK4 so the two systems can be combined if you don’t mind some visual differences but I’d suggest not to mix the two systems.
Features on the new MK5 design (see detailed listing with photos and dimensions at the bottom of the web page):
Engraved marks for all adjustments – now you can record and reproduce your settings any time
New 152mm stainless steel hook, 137mm and 97mm Nylon FT-hooks
HFT-compatible 2.25” (57mm) Nylon hook
Extended upper wing base option, for better integration with the Butt Pad Kit or to add half a link length to the upper wing
Slim hook holder links – don’t protrude that much as the old design
Rounded link elements – gives a smoother fit when the links are twisted
Professional folding windicator with orange Nylon cord or alligator clips. Fits to any barrel or air cylinder (with the included adapter), 11mm dovetails, Picatinny/Weaver rails, standard UIT accessory rails, 1″ (25.4mm), 30mm and 34mm scope tubes.
The arm clicks into position when folded in or out (except for the scope ring versions). Ready to use with cable ties / bolts and cord, but of course you can replace the cord any time you like. Unbreakable, flexible, and only 7 grams. Made of high quality laser sintered Nylon, stainless steel nut and bolt.
NEW: also available with new design scope rings. For more features and combinations with other scope ring features see Every Possible (And Impossible) Scope Ring Combination. NEW: all the windicators are available with alligator clips, too. See the options below.
£34.99–£44.99Price range: £34.99 through £44.99Select options
This product has multiple variants. The options may be chosen on the product page
Original wooden parts for FWB P70 Match/FT Alutec stock:
– Grip: R/H size L, with two threaded nuts at the bottom for mounting an additional palm shelf,
– Cheek piece: prone style (symmetric),
Colours: beech/red laminate.
All in good condition, with a few minor marks from usage, as seen on the photos.
Folding bipod, made of quality materials. Body: black or silver anodised aluminium alloy, legs: 5mm stainless steel with 20mm black plastic balls.
Long legs (12.5cm = 5″ between the ground and the rifle’s stock)
Fits to all rifles with standard accessory rail or similar (AirArms, Anschütz, Walther, Steyr, Feinwerkbau, Hämmerli etc.)
Sorry this product is discontinued but now I have two black ex demo pieces available, been used for a couple of competitions, photo sessions and as a demo when selling other ones on international competitions. In excellent condition, only with a few marks from being mounted onto a rifle. These are the very last ones of the JOPA series.
The official WFTF Target Checker (designed by Brian Samson, public domain, printed under the Creative Commons CC0 licence).
“The device is designed to give an equivalent impact force to an airgun pellet hitting the paddle of a target at 5.5 ft/lbs energy (7 Joules). To mimic the effect of a target being shot at with a WFTF legal air rifle at 55 yards.”
Fully assembled and ready to use. High quality 3D-printed PLA/PHA in black and orange colours, stainless steel bolts/nuts.
MK2 2018– Brian’s original design
MK3 2019 – Smaller improvements like easily adjustable depth gauge, wrist strap, killzone diameter checkers etc., see below for more details.
MK4 2020 – Further improvements to resolve all issues of the original design. Re-designed internal parts, spring tension can be fine-tuned with a hex key, free travel length of the probe doubled.
MK4.1 2023 – Further improvements, small modifications, safer trigger etc.
MK4.2 2024 – Morer improvements, re-designed trigger, spring guide etc.
Available colours: Dutch Orange, Ultra Marine Blue, Traffic Red, Leaf Green, Intense Green, Fluorescent Pink, Signal Yellow, Shining Silver and Sky Blue, all with black sides.
Detailed instructions manual (by Scott Hull): download PDF
£49.99–£79.99Price range: £49.99 through £79.99Select options
This product has multiple variants. The options may be chosen on the product page
Combro Chronies use IR photodiodes as light source so they don’t need external light, but direct sunshine or fluorescent lights may disturb its function, resulting false readings.
This simple shade can be snapped onto the Chrony and gives an effective shade for the light sensors.
The new extended version connects with a bayonet to the Sniper barrel weight, keeping the chrony on its place, aligned with the barrel.
£19.99–£29.99Price range: £19.99 through £29.99Select options
This product has multiple variants. The options may be chosen on the product page
Last ones of the old MK4 design ON SALE
Click here for the Scorpion New Design version.
Fully adjustable Field Target hook, with much more versatility than the usual Gemini clones. Everything can be adjusted even in the shooting position, without disassembling the hook. Modular system that can be upgraded later if needed.
Massive construction, without any flex and slip, a lightweight and versatile alternative to the traditional metal hooks.A
These are the very last ones of the old MK4 design and are on sale, so I can offer them only in these configurations listed below, but you can reduce the upper wing length if needed, or can add some extra parts in the options menu.
It is possible to buy certain MK5 parts as well, for a partial upgrade (but please contact me before placing an order to check compatibility!)
Magnifier for the clicks turret, fully adjustable, with a lightweight and unbreakable 3x mag Fresnel lens. Visible lens size 28×17 mm. Fits 1″ / 30mm / 34mm / 36mm / 40mm scope tubes. It can happen that you’ll need a stronger or weaker lens (depends on your eyesight), the frame can hold any flat lens up to 0.8 mm thickness or an acrylic lens that is cut to the right shape.
Check out its brother, too: EagleEye Parallax Magnifier. Please note that there is a new design that may slightly differ from the pictures.
The magnifiers can be ordered also in ‘Target shooter’ version with two magnifying windows (for elevation and windage turret)
New updated ring design is available. The same function but a better looking ring, scope tube protection, bolt/nut secured against falling out.
Reviews
There are no reviews yet.